Locked History Actions

Diff for "QuakeML2.0/MacroseismicDiscussion"

Differences between revisions 9 and 12 (spanning 3 versions)
Revision 9 as of 2018-08-27 13:11:42
Size: 45806
Editor: MarioLocati
Comment:
Revision 12 as of 2018-08-27 13:43:03
Size: 46796
Editor: MarioLocati
Comment:
Deletions are marked like this. Additions are marked like this.
Line 115: Line 115:
Classification of the severity of the ground shaking on the basis of observed effects in a limited area. It involves concepts of a statistical nature (effects on a proportion of a sample) over a limited area (not single buildings, not large cities). A cumulative measure of the effects of an earthquake at a particular place at the Earth’s surface on humans and (or) structures and thus a measure of the strength of earthquake shaking. Different from magnitude, the intensity at a point depends not only on the earthquake strength (released seismic energy) or earthquake size (released seismic moment), but also on the epicentral distance, the focal depth, the position of the observation point with respect to the type of focal mechanism and its directivity, and the local site conditions.
Line 126: Line 126:
TODO Macroseismic intensity assessments assign integer numerals to observed physical damages and perceived motions, thus classifying the shaking strength observed at a site. When these intensity classes are arranged in a systematic and mutually linked reasonable way, they form a macroseismic scale.
Line 198: Line 198:
TODO The Macroseismic Data Point (MDP), correspond to a macroseismic observation, and it is defined by the combination of four key elements: 1) a source of information, 2) a seismic event, 3) a place, and 4) a macroseismic intensity.
Line 429: Line 429:
Intensity experienced at the epicentre; as such, virtual in most cases, but can be the observed intensity at a location close to the epicentre. Many, but not all, compilers fix the Epicentral Intensity as the Maximum Observed Intensity. The intensity of macroseismic shaking observed at (or inferred to be) the epicenter of a strong earthquake, usually abbreviated as Io.
Line 440: Line 440:
TODO Maximum macroseismic intensity value experienced in a particular earthquake.
Line 486: Line 486:
TODO A magnitude value determined on the basis of macroseismic data, either from Epicentral Intensity, or by means of repeatable procedures (computer codes) considering all Macroseismic Data Points, or by expert judgment.

Discussion on package Macroseismic

Quick navigation: go to package

Waveform | Common | StrongMotion | StationCharacterization | BasicEventDescriptionTypes | BasicEventDescription | SiteCharacterization | Macroseismic | Filter | ResourceMetadata |

In current package (Macroseismic): go to class

PlaceName | MacroseismicIntensity | ReportReference | MDP | MacroseismicOrigin | MacroseismicMagnitude | MDPReference | MDPSet | MDPSetReference | EventConsequences | MacroseismicEvent | Place | MacroseismicParameters | PlaceNameType | MDPPlaceType |


Macroseismic overview page

(!) Macroseismic class diagram


PlaceName [element]

TODO


Discussion area: please fill in your comments below (between the horizontal lines) and tag with your user name and the date of your comment.
Example: FabianEuchner, 2014-10-21


PlaceName.name (type string)

TODO


Discussion area: please fill in your comments below (between the horizontal lines) and tag with your user name and the date of your comment.
Example: FabianEuchner, 2014-10-21


PlaceName.type (type ms:PlaceNameType)

TODO


Discussion area: please fill in your comments below (between the horizontal lines) and tag with your user name and the date of your comment.
Example: FabianEuchner, 2014-10-21


PlaceName.alternateType (type ms:PlaceNameType)

TODO


Discussion area: please fill in your comments below (between the horizontal lines) and tag with your user name and the date of your comment.
Example: FabianEuchner, 2014-10-21


PlaceName.language (type string)

TODO


Discussion area: please fill in your comments below (between the horizontal lines) and tag with your user name and the date of your comment.
Example: FabianEuchner, 2014-10-21


PlaceName.epoch (type co:OpenEpoch)

TODO


Discussion area: please fill in your comments below (between the horizontal lines) and tag with your user name and the date of your comment.
Example: FabianEuchner, 2014-10-21


top of page


MacroseismicIntensity [type]

A cumulative measure of the effects of an earthquake at a particular place at the Earth’s surface on humans and (or) structures and thus a measure of the strength of earthquake shaking. Different from magnitude, the intensity at a point depends not only on the earthquake strength (released seismic energy) or earthquake size (released seismic moment), but also on the epicentral distance, the focal depth, the position of the observation point with respect to the type of focal mechanism and its directivity, and the local site conditions.


Discussion area: please fill in your comments below (between the horizontal lines) and tag with your user name and the date of your comment.
Example: FabianEuchner, 2014-10-21


MacroseismicIntensity.macroseismicScale (type co:ResourceIdentifier)

Macroseismic intensity assessments assign integer numerals to observed physical damages and perceived motions, thus classifying the shaking strength observed at a site. When these intensity classes are arranged in a systematic and mutually linked reasonable way, they form a macroseismic scale.


Discussion area: please fill in your comments below (between the horizontal lines) and tag with your user name and the date of your comment.
Example: FabianEuchner, 2014-10-21


MacroseismicIntensity.expectedIntensity (type ms:IntensityValueType)

TODO


Discussion area: please fill in your comments below (between the horizontal lines) and tag with your user name and the date of your comment.
Example: FabianEuchner, 2014-10-21


MacroseismicIntensity.maximalCredibleIntensity (type ms:IntensityValueType)

TODO


Discussion area: please fill in your comments below (between the horizontal lines) and tag with your user name and the date of your comment.
Example: FabianEuchner, 2014-10-21


MacroseismicIntensity.minimalCredibleIntensity (type ms:IntensityValueType)

TODO


Discussion area: please fill in your comments below (between the horizontal lines) and tag with your user name and the date of your comment.
Example: FabianEuchner, 2014-10-21


top of page


ReportReference [element]

TODO


Discussion area: please fill in your comments below (between the horizontal lines) and tag with your user name and the date of your comment.
Example: FabianEuchner, 2014-10-21


ReportReference.eqReportID (type co:ResourceIdentifier)

TODO


Discussion area: please fill in your comments below (between the horizontal lines) and tag with your user name and the date of your comment.
Example: FabianEuchner, 2014-10-21


top of page


MDP [element]

The Macroseismic Data Point (MDP), correspond to a macroseismic observation, and it is defined by the combination of four key elements: 1) a source of information, 2) a seismic event, 3) a place, and 4) a macroseismic intensity.


Discussion area: please fill in your comments below (between the horizontal lines) and tag with your user name and the date of your comment.
Example: FabianEuchner, 2014-10-21


MDP.publicID (type co:ResourceIdentifier)

TODO


Discussion area: please fill in your comments below (between the horizontal lines) and tag with your user name and the date of your comment.
Example: FabianEuchner, 2014-10-21


MDP.placeReference (type co:ResourceIdentifier)

TODO


Discussion area: please fill in your comments below (between the horizontal lines) and tag with your user name and the date of your comment.
Example: FabianEuchner, 2014-10-21


MDP.intensity (type ms:MacroseismicIntensity)

TODO


Discussion area: please fill in your comments below (between the horizontal lines) and tag with your user name and the date of your comment.
Example: FabianEuchner, 2014-10-21


MDP.reportCount (type positive int)

TODO


Discussion area: please fill in your comments below (between the horizontal lines) and tag with your user name and the date of your comment.
Example: FabianEuchner, 2014-10-21


MDP.reportedTime (type co:TimeQuantity)

TODO


Discussion area: please fill in your comments below (between the horizontal lines) and tag with your user name and the date of your comment.
Example: FabianEuchner, 2014-10-21


MDP.eventReference (type co:ResourceIdentifier)

TODO


Discussion area: please fill in your comments below (between the horizontal lines) and tag with your user name and the date of your comment.
Example: FabianEuchner, 2014-10-21


MDP.methodID (type co:ResourceIdentifier)

TODO


Discussion area: please fill in your comments below (between the horizontal lines) and tag with your user name and the date of your comment.
Example: FabianEuchner, 2014-10-21


MDP.quality (type string)

TODO


Discussion area: please fill in your comments below (between the horizontal lines) and tag with your user name and the date of your comment.
Example: FabianEuchner, 2014-10-21


MDP.evaluationMode (type co:EvaluationMode)

TODO


Discussion area: please fill in your comments below (between the horizontal lines) and tag with your user name and the date of your comment.
Example: FabianEuchner, 2014-10-21


MDP.evaluationStatus (type co:EvaluationStatus)

TODO


Discussion area: please fill in your comments below (between the horizontal lines) and tag with your user name and the date of your comment.
Example: FabianEuchner, 2014-10-21


MDP.literatureSource (type rm:LiteratureSource)

TODO


Discussion area: please fill in your comments below (between the horizontal lines) and tag with your user name and the date of your comment.
Example: FabianEuchner, 2014-10-21


MDP.creationInfo (type rm:CreationInfo)

TODO


Discussion area: please fill in your comments below (between the horizontal lines) and tag with your user name and the date of your comment.
Example: FabianEuchner, 2014-10-21


MDP.reportReference (type ms:ReportReference)

TODO


Discussion area: please fill in your comments below (between the horizontal lines) and tag with your user name and the date of your comment.
Example: FabianEuchner, 2014-10-21


MDP.relatedMDP (type rm:RelatedResource)

TODO


Discussion area: please fill in your comments below (between the horizontal lines) and tag with your user name and the date of your comment.
Example: FabianEuchner, 2014-10-21


MDP.comment (type rm:Comment)

TODO


Discussion area: please fill in your comments below (between the horizontal lines) and tag with your user name and the date of your comment.
Example: FabianEuchner, 2014-10-21


top of page


MacroseismicOrigin [element]

TODO


Discussion area: please fill in your comments below (between the horizontal lines) and tag with your user name and the date of your comment.
Example: FabianEuchner, 2014-10-21


MacroseismicOrigin.publicID (type co:ResourceIdentifier)

TODO


Discussion area: please fill in your comments below (between the horizontal lines) and tag with your user name and the date of your comment.
Example: FabianEuchner, 2014-10-21


MacroseismicOrigin.originReference (type co:ResourceIdentifier)

TODO


Discussion area: please fill in your comments below (between the horizontal lines) and tag with your user name and the date of your comment.
Example: FabianEuchner, 2014-10-21


MacroseismicOrigin.definingMDPSet (type co:ResourceIdentifier)

TODO


Discussion area: please fill in your comments below (between the horizontal lines) and tag with your user name and the date of your comment.
Example: FabianEuchner, 2014-10-21


MacroseismicOrigin.contributingMDPCount (type positive int)

TODO


Discussion area: please fill in your comments below (between the horizontal lines) and tag with your user name and the date of your comment.
Example: FabianEuchner, 2014-10-21


MacroseismicOrigin.epicentralIntensity (type ms:MacroseismicIntensity)

The intensity of macroseismic shaking observed at (or inferred to be) the epicenter of a strong earthquake, usually abbreviated as Io.


Discussion area: please fill in your comments below (between the horizontal lines) and tag with your user name and the date of your comment.
Example: FabianEuchner, 2014-10-21


MacroseismicOrigin.maximumIntensity (type ms:MacroseismicIntensity)

Maximum macroseismic intensity value experienced in a particular earthquake.


Discussion area: please fill in your comments below (between the horizontal lines) and tag with your user name and the date of your comment.
Example: FabianEuchner, 2014-10-21


MacroseismicOrigin.literatureSource (type rm:LiteratureSource)

TODO


Discussion area: please fill in your comments below (between the horizontal lines) and tag with your user name and the date of your comment.
Example: FabianEuchner, 2014-10-21


MacroseismicOrigin.creationInfo (type rm:CreationInfo)

TODO


Discussion area: please fill in your comments below (between the horizontal lines) and tag with your user name and the date of your comment.
Example: FabianEuchner, 2014-10-21


MacroseismicOrigin.relatedMacroseismicOrigin (type rm:RelatedResource)

TODO


Discussion area: please fill in your comments below (between the horizontal lines) and tag with your user name and the date of your comment.
Example: FabianEuchner, 2014-10-21


top of page


MacroseismicMagnitude [element]

A magnitude value determined on the basis of macroseismic data, either from Epicentral Intensity, or by means of repeatable procedures (computer codes) considering all Macroseismic Data Points, or by expert judgment.


Discussion area: please fill in your comments below (between the horizontal lines) and tag with your user name and the date of your comment.
Example: FabianEuchner, 2014-10-21


MacroseismicMagnitude.publicID (type co:ResourceIdentifier)

TODO


Discussion area: please fill in your comments below (between the horizontal lines) and tag with your user name and the date of your comment.
Example: FabianEuchner, 2014-10-21


MacroseismicMagnitude.magnitudeReference (type co:ResourceIdentifier)

TODO


Discussion area: please fill in your comments below (between the horizontal lines) and tag with your user name and the date of your comment.
Example: FabianEuchner, 2014-10-21


MacroseismicMagnitude.definingMDPSet (type co:ResourceIdentifier)

TODO


Discussion area: please fill in your comments below (between the horizontal lines) and tag with your user name and the date of your comment.
Example: FabianEuchner, 2014-10-21


MacroseismicMagnitude.contributingMDPCount (type positive int)

TODO


Discussion area: please fill in your comments below (between the horizontal lines) and tag with your user name and the date of your comment.
Example: FabianEuchner, 2014-10-21


MacroseismicMagnitude.literatureSource (type rm:LiteratureSource)

TODO


Discussion area: please fill in your comments below (between the horizontal lines) and tag with your user name and the date of your comment.
Example: FabianEuchner, 2014-10-21


MacroseismicMagnitude.creationInfo (type rm:CreationInfo)

TODO


Discussion area: please fill in your comments below (between the horizontal lines) and tag with your user name and the date of your comment.
Example: FabianEuchner, 2014-10-21


MacroseismicMagnitude.relatedMacroseismicMagnitude (type rm:RelatedResource)

TODO


Discussion area: please fill in your comments below (between the horizontal lines) and tag with your user name and the date of your comment.
Example: FabianEuchner, 2014-10-21


top of page


MDPReference [element]

TODO


Discussion area: please fill in your comments below (between the horizontal lines) and tag with your user name and the date of your comment.
Example: FabianEuchner, 2014-10-21


MDPReference.mdpID (type co:ResourceIdentifier)

TODO


Discussion area: please fill in your comments below (between the horizontal lines) and tag with your user name and the date of your comment.
Example: FabianEuchner, 2014-10-21


MDPReference.isValid (type boolean)

TODO


Discussion area: please fill in your comments below (between the horizontal lines) and tag with your user name and the date of your comment.
Example: FabianEuchner, 2014-10-21


MDPReference.validityComment (type rm:Comment)

TODO


Discussion area: please fill in your comments below (between the horizontal lines) and tag with your user name and the date of your comment.
Example: FabianEuchner, 2014-10-21


top of page


MDPSet [element]

TODO


Discussion area: please fill in your comments below (between the horizontal lines) and tag with your user name and the date of your comment.
Example: FabianEuchner, 2014-10-21


MDPSet.publicID (type co:ResourceIdentifier)

TODO


Discussion area: please fill in your comments below (between the horizontal lines) and tag with your user name and the date of your comment.
Example: FabianEuchner, 2014-10-21


MDPSet.methodID (type co:ResourceIdentifier)

TODO


Discussion area: please fill in your comments below (between the horizontal lines) and tag with your user name and the date of your comment.
Example: FabianEuchner, 2014-10-21


MDPSet.mdpCount (type positive int)

TODO


Discussion area: please fill in your comments below (between the horizontal lines) and tag with your user name and the date of your comment.
Example: FabianEuchner, 2014-10-21


MDPSet.maximumIntensity (type ms:MacroseismicIntensity)

TODO


Discussion area: please fill in your comments below (between the horizontal lines) and tag with your user name and the date of your comment.
Example: FabianEuchner, 2014-10-21


MDPSet.literatureSource (type rm:LiteratureSource)

TODO


Discussion area: please fill in your comments below (between the horizontal lines) and tag with your user name and the date of your comment.
Example: FabianEuchner, 2014-10-21


MDPSet.creationInfo (type rm:CreationInfo)

TODO


Discussion area: please fill in your comments below (between the horizontal lines) and tag with your user name and the date of your comment.
Example: FabianEuchner, 2014-10-21


MDPSet.mdpReference (type ms:MDPReference)

TODO


Discussion area: please fill in your comments below (between the horizontal lines) and tag with your user name and the date of your comment.
Example: FabianEuchner, 2014-10-21


MDPSet.relatedMDPSet (type rm:RelatedResource)

TODO


Discussion area: please fill in your comments below (between the horizontal lines) and tag with your user name and the date of your comment.
Example: FabianEuchner, 2014-10-21


MDPSet.comment (type rm:Comment)

TODO


Discussion area: please fill in your comments below (between the horizontal lines) and tag with your user name and the date of your comment.
Example: FabianEuchner, 2014-10-21


top of page


MDPSetReference [element]

TODO


Discussion area: please fill in your comments below (between the horizontal lines) and tag with your user name and the date of your comment.
Example: FabianEuchner, 2014-10-21


MDPSetReference.mdpSetID (type co:ResourceIdentifier)

TODO


Discussion area: please fill in your comments below (between the horizontal lines) and tag with your user name and the date of your comment.
Example: FabianEuchner, 2014-10-21


top of page


EventConsequences [element]

TODO


Discussion area: please fill in your comments below (between the horizontal lines) and tag with your user name and the date of your comment.
Example: FabianEuchner, 2014-10-21


EventConsequences.publicID (type co:ResourceIdentifier)

TODO


Discussion area: please fill in your comments below (between the horizontal lines) and tag with your user name and the date of your comment.
Example: FabianEuchner, 2014-10-21


EventConsequences.fatalities (type co:IntegerQuantity)

TODO


Discussion area: please fill in your comments below (between the horizontal lines) and tag with your user name and the date of your comment.
Example: FabianEuchner, 2014-10-21


EventConsequences.fatalityDescription (type string)

TODO


Discussion area: please fill in your comments below (between the horizontal lines) and tag with your user name and the date of your comment.
Example: FabianEuchner, 2014-10-21


EventConsequences.injured (type co:IntegerQuantity)

TODO


Discussion area: please fill in your comments below (between the horizontal lines) and tag with your user name and the date of your comment.
Example: FabianEuchner, 2014-10-21


EventConsequences.injuredDescription (type string)

TODO


Discussion area: please fill in your comments below (between the horizontal lines) and tag with your user name and the date of your comment.
Example: FabianEuchner, 2014-10-21


EventConsequences.homeless (type co:IntegerQuantity)

TODO


Discussion area: please fill in your comments below (between the horizontal lines) and tag with your user name and the date of your comment.
Example: FabianEuchner, 2014-10-21


EventConsequences.literatureSource (type rm:LiteratureSource)

TODO


Discussion area: please fill in your comments below (between the horizontal lines) and tag with your user name and the date of your comment.
Example: FabianEuchner, 2014-10-21


EventConsequences.creationInfo (type rm:CreationInfo)

TODO


Discussion area: please fill in your comments below (between the horizontal lines) and tag with your user name and the date of your comment.
Example: FabianEuchner, 2014-10-21


top of page


MacroseismicEvent [element]

TODO


Discussion area: please fill in your comments below (between the horizontal lines) and tag with your user name and the date of your comment.
Example: FabianEuchner, 2014-10-21


MacroseismicEvent.publicID (type co:ResourceIdentifier)

TODO


Discussion area: please fill in your comments below (between the horizontal lines) and tag with your user name and the date of your comment.
Example: FabianEuchner, 2014-10-21


MacroseismicEvent.eventReference (type co:ResourceIdentifier)

TODO


Discussion area: please fill in your comments below (between the horizontal lines) and tag with your user name and the date of your comment.
Example: FabianEuchner, 2014-10-21


MacroseismicEvent.preferredMDPSetID (type co:ResourceIdentifier)

TODO


Discussion area: please fill in your comments below (between the horizontal lines) and tag with your user name and the date of your comment.
Example: FabianEuchner, 2014-10-21


MacroseismicEvent.preferredMacroseismicOriginID (type co:ResourceIdentifier)

TODO


Discussion area: please fill in your comments below (between the horizontal lines) and tag with your user name and the date of your comment.
Example: FabianEuchner, 2014-10-21


MacroseismicEvent.preferredEventConsequencesID (type co:ResourceIdentifier)

TODO


Discussion area: please fill in your comments below (between the horizontal lines) and tag with your user name and the date of your comment.
Example: FabianEuchner, 2014-10-21


MacroseismicEvent.literatureSource (type rm:LiteratureSource)

TODO


Discussion area: please fill in your comments below (between the horizontal lines) and tag with your user name and the date of your comment.
Example: FabianEuchner, 2014-10-21


MacroseismicEvent.creationInfo (type rm:CreationInfo)

TODO


Discussion area: please fill in your comments below (between the horizontal lines) and tag with your user name and the date of your comment.
Example: FabianEuchner, 2014-10-21


MacroseismicEvent.mdpSetReference (type ms:MDPSetReference)

TODO


Discussion area: please fill in your comments below (between the horizontal lines) and tag with your user name and the date of your comment.
Example: FabianEuchner, 2014-10-21


MacroseismicEvent.eventConsequences (type ms:EventConsequences)

TODO


Discussion area: please fill in your comments below (between the horizontal lines) and tag with your user name and the date of your comment.
Example: FabianEuchner, 2014-10-21


top of page


Place [element]

A particular place affected by some earthquake, where some level of severity of shaking is typical of what was experienced. This entails, firstly, that the settlement is large enough for a statistically significant sample to be obtained, without being unduly affected by small-scale local peculiarities, and secondly, that it is not so large that genuine local variations are not blurred over. Intensity should not be assigned to a single building or street; neither should a single intensity be assigned to a metropolis or a county. In general circumstances, the smallest place should be no smaller than a village, and the largest no larger than a moderately-sized European town. Thus it is reasonable to assign a single intensity value to, say, Piraeus, but not to the whole of modern Athens. No rigid rules will be stated, since individual circumstances will influence the user in the decisions he makes in particular cases. It is also desirable to assign intensity values to locations which are reasonably homogeneous, especially with regard to soil types, otherwise the range of shaking effects reported may be very large. However, this is not always practicable, depending on the precision in the data and how they were gathered. In the case where a town has areas in which the geotechnical conditions are very different (for instance, one half might be on an alluvial bank but the other on a plateau) then different intensity values should be assessed for the two parts of the town independently. [ text extracted from the European Macroseismic Scale 1998, EMS-98 ]


Discussion area: please fill in your comments below (between the horizontal lines) and tag with your user name and the date of your comment.
Example: FabianEuchner, 2014-10-21


Place.publicID (type co:ResourceIdentifier)

TODO


Discussion area: please fill in your comments below (between the horizontal lines) and tag with your user name and the date of your comment.
Example: FabianEuchner, 2014-10-21


Place.preferredName (type ms:PlaceName)

TODO


Discussion area: please fill in your comments below (between the horizontal lines) and tag with your user name and the date of your comment.
Example: FabianEuchner, 2014-10-21


Place.epoch (type co:OpenEpoch)

TODO


Discussion area: please fill in your comments below (between the horizontal lines) and tag with your user name and the date of your comment.
Example: FabianEuchner, 2014-10-21


Place.referenceLatitude (type co:RealQuantity)

TODO


Discussion area: please fill in your comments below (between the horizontal lines) and tag with your user name and the date of your comment.
Example: FabianEuchner, 2014-10-21


Place.referenceLongitude (type co:RealQuantity)

TODO


Discussion area: please fill in your comments below (between the horizontal lines) and tag with your user name and the date of your comment.
Example: FabianEuchner, 2014-10-21


Place.horizontalUncertainty (type float)

TODO


Discussion area: please fill in your comments below (between the horizontal lines) and tag with your user name and the date of your comment.
Example: FabianEuchner, 2014-10-21


Place.geometry (type string)

TODO


Discussion area: please fill in your comments below (between the horizontal lines) and tag with your user name and the date of your comment.
Example: FabianEuchner, 2014-10-21


Place.externalGazetteer (type co:RegisteredIdentifier)

TODO


Discussion area: please fill in your comments below (between the horizontal lines) and tag with your user name and the date of your comment.
Example: FabianEuchner, 2014-10-21


Place.type (type ms:MDPPlaceType)

TODO


Discussion area: please fill in your comments below (between the horizontal lines) and tag with your user name and the date of your comment.
Example: FabianEuchner, 2014-10-21


Place.zipCode (type string)

TODO


Discussion area: please fill in your comments below (between the horizontal lines) and tag with your user name and the date of your comment.
Example: FabianEuchner, 2014-10-21


Place.isoCountryCode (type co:CountryCodeURI)

TODO


Discussion area: please fill in your comments below (between the horizontal lines) and tag with your user name and the date of your comment.
Example: FabianEuchner, 2014-10-21


Place.altitude (type co:RealQuantity)

TODO


Discussion area: please fill in your comments below (between the horizontal lines) and tag with your user name and the date of your comment.
Example: FabianEuchner, 2014-10-21


Place.literatureSource (type rm:LiteratureSource)

TODO


Discussion area: please fill in your comments below (between the horizontal lines) and tag with your user name and the date of your comment.
Example: FabianEuchner, 2014-10-21


Place.siteMorphology (type stc:SiteMorphology)

TODO


Discussion area: please fill in your comments below (between the horizontal lines) and tag with your user name and the date of your comment.
Example: FabianEuchner, 2014-10-21


Place.creationInfo (type rm:CreationInfo)

TODO


Discussion area: please fill in your comments below (between the horizontal lines) and tag with your user name and the date of your comment.
Example: FabianEuchner, 2014-10-21


Place.name (type ms:PlaceName)

TODO


Discussion area: please fill in your comments below (between the horizontal lines) and tag with your user name and the date of your comment.
Example: FabianEuchner, 2014-10-21


top of page


MacroseismicParameters [element]

TODO


Discussion area: please fill in your comments below (between the horizontal lines) and tag with your user name and the date of your comment.
Example: FabianEuchner, 2014-10-21


MacroseismicParameters.publicID (type co:ResourceIdentifier)

TODO


Discussion area: please fill in your comments below (between the horizontal lines) and tag with your user name and the date of your comment.
Example: FabianEuchner, 2014-10-21


MacroseismicParameters.mdp (type ms:MDP)

TODO


Discussion area: please fill in your comments below (between the horizontal lines) and tag with your user name and the date of your comment.
Example: FabianEuchner, 2014-10-21


MacroseismicParameters.macroseismicOrigin (type ms:MacroseismicOrigin)

TODO


Discussion area: please fill in your comments below (between the horizontal lines) and tag with your user name and the date of your comment.
Example: FabianEuchner, 2014-10-21


MacroseismicParameters.macroseismicMagnitude (type ms:MacroseismicMagnitude)

TODO


Discussion area: please fill in your comments below (between the horizontal lines) and tag with your user name and the date of your comment.
Example: FabianEuchner, 2014-10-21


MacroseismicParameters.mdpSet (type ms:MDPSet)

TODO


Discussion area: please fill in your comments below (between the horizontal lines) and tag with your user name and the date of your comment.
Example: FabianEuchner, 2014-10-21


MacroseismicParameters.macroseismicEvent (type ms:MacroseismicEvent)

TODO


Discussion area: please fill in your comments below (between the horizontal lines) and tag with your user name and the date of your comment.
Example: FabianEuchner, 2014-10-21


MacroseismicParameters.place (type ms:Place)

TODO


Discussion area: please fill in your comments below (between the horizontal lines) and tag with your user name and the date of your comment.
Example: FabianEuchner, 2014-10-21


top of page


PlaceNameType [enumeration]

TODO


Discussion area: please fill in your comments below (between the horizontal lines) and tag with your user name and the date of your comment.
Example: FabianEuchner, 2014-10-21



MDPPlaceType [enumeration]

TODO


Discussion area: please fill in your comments below (between the horizontal lines) and tag with your user name and the date of your comment.
Example: FabianEuchner, 2014-10-21


top of page